| Fixed in Version | Bug: Bug # | Summary | Tool | Date Fixed |
|---|
| CADconform for MicroStation v7.01.28 | B-20121923 | Possible hang when a cell library contains an underscore and cell cache is on | Conform | 26/04/2012 |
| CADconform for MicroStation v7.01.28 | B-20121924 | Possible crash in cell caching when CSF files are used with cell libraries | Conform | 26/04/2012 |
| CADconform for MicroStation v7.01.27 | B-20121922 | PowerDraft with UAC enabled may not be able to create local client paths | Configuration | 25/04/2012 |
| CADconform for MicroStation v7.01.27 | B-20121921 | Conform may change text node size when size is not defined in standards | Conform | 25/04/2012 |
| CADconform for MicroStation v7.01.27 | B-20121920 | Conform may crash on orphan cells with thousands of components | Conform | 23/04/2012 |
| CADconform for MicroStation v7.01.26 | B-20121915 | Some dimension types do not have their text size fixed | Conform | 4/04/2012 |
| CADconform for MicroStation v7.01.26 | B-20121912 | Setting the dimension font by name does not work in the Drafting Menu | Drafting Menu | 30/03/2012 |
| CADconform for MicroStation v7.01.26 | B-20121917 | Conform-to from Report Viewer may set text size incorrectly | Reporting | 5/04/2012 |
| CADconform for MicroStation v7.01.26 | B-20121918 | Changing client version sometimes failed to update local config file | Configuration | 5/04/2012 |
| CADconform for MicroStation v7.01.26 | B-20121916 | Text font is not applied in Conform-by-ranges | Conform | 5/04/2012 |
| CADconform for MicroStation v7.01.26 | B-20121913 | Report does not refresh drawing scale of master model on completion | Batch Processor; Reporting | 30/03/2012 |
| CADconform for MicroStation v7.01.26 | B-20121914 | Cell components should not be ignored if cells are not checked | Conform | 4/04/2012 |
| CADconform for MicroStation v7.01.26 | B-20121911 | Dimensions in reference files interpret the text size using the master UORs | Reporting | 28/03/2012 |
| CADconform for MicroStation v7.01.25 | B-20121910 | Preference file path may be clipped if server install path is too long | Configuration; Installer | 20/03/2012 |
| CADconform for MicroStation v7.01.24 | B-20121903 | Crash when conforming cells with some dimension types ignoring font numbers | Conform | 25/01/2012 |
| CADconform for MicroStation v7.01.24 | B-20121905 | CADconform hangs when invalidating legacy watermark | Watermarking | 7/02/2012 |
| CADconform for MicroStation v7.01.24 | B-20121906 | Draft-by-ranges does not update text colour in MicroStation V8i | Drafting Menu | 7/02/2012 |
| CADconform for MicroStation v7.01.24 | B-20121904 | MicroStation build does not allow more than 4 Data-Fields per cell | Feature Table Editor | 6/02/2012 |
| CADconform for MicroStation v7.01.23 | B-20111902 | Conform does not support cells with nested anonymous DWG shared cell components | Conform | 23/12/2011 |
| CADconform for MicroStation v7.01.22 | B-20111896 | Cell definition checking may be inconsistent with point cells | Conform | 13/12/2011 |
| CADconform for MicroStation v7.01.22 | B-20111897 | Cell scale lock is only allowed in 3D files when choosing replacement cell | Conform | 13/12/2011 |
| CADconform for MicroStation v7.01.22 | B-20111900 | Cancelling a batch report only cancels the current file operation | Reporting | 16/12/2011 |
| CADconform for MicroStation v7.01.22 | B-20111898 | Spurious unmatched cell name may appear due to find file error | Conform; Reporting | 15/12/2011 |
| CADconform for MicroStation v7.01.22 | B-20111901 | The report 'Conform To' tool does not support cell components | Reporting | 16/12/2011 |
| CADconform for MicroStation v7.01.22 | B-20111899 | Colour match scoring may crash if colour index is greater than 256 | Conform; Reporting | 15/12/2011 |
| CADconform for MicroStation v7.01.21 | B-20111895 | Conform-to may not work on elements not located in the active model | Reporting | 6/12/2011 |
| CADconform for MicroStation v7.01.20 | B-20111889 | Shape features do not allow 'Conform To' on linear features in Reports | Reporting | 11/11/2011 |
| CADconform for MicroStation v7.01.20 | B-20111874 | Conforming text may change the alignment settings unnecessarily | Conform | 14/11/2011 |
| CADconform for MicroStation v7.01.20 | B-20111890 | Spurious missing feature errors when reviewing suggested features | Conform | 17/11/2011 |
| CADconform for MicroStation v7.01.20 | B-20111891 | Multi-set symbology propagates the first level unnecessarily | Feature Table Editor | 18/11/2011 |
| CADconform for MicroStation v7.01.20 | B-20111892 | Network client install does not set correct CADconform share path | Installer | 18/11/2011 |
| CADconform for MicroStation v7.01.19 | B-20111882 | Dimensions may show as removed as soon as the preview is shown | Conform | 8/11/2011 |
| CADconform for MicroStation v7.01.19 | B-20111881 | Dimension text weight may not be changed successfully in Conform | Conform | 1/11/2011 |
| CADconform for MicroStation v7.01.19 | B-20111883 | Selecting text to conform to may change the active text-style | Conform | 3/11/2011 |
| CADconform for MicroStation v7.01.19 | B-20111893 | Long delay on opening CADconform or Conform when MS_CELLLIST is large | Conform | 21/11/2011 |
| CADconform for MicroStation v7.01.19 | B-20111885 | Dimensions may show as removed as soon as the 'Change' button is pressed | Conform | 8/11/2011 |
| CADconform for MicroStation v7.01.19 | B-20111880 | Dimension text-style may not be shown in Conform feature summary | Conform | 1/11/2011 |
| CADconform for MicroStation v7.01.19 | B-20111879 | Text-style mismatch may not be scored correctly in Conform | Conform | 31/10/2011 |
| CADconform for MicroStation v7.01.19 | B-20111878 | Text-styles may inherit the incorrect font if conformed to a DGNLIB text-style | Conform | 3/11/2011 |
| CADconform for MicroStation v7.01.19 | B-20111876 | Conforming cells may enable locked scale if drawing scale window is opened | Conform | 27/10/2011 |
| CADconform for MicroStation v7.01.19 | B-20111884 | Dimension annotation override cannot be disabled - partial fix | Conform | 7/11/2011 |
| CADconform for MicroStation v7.01.18 | B-20111855 | Draft-by-ranges may not show a custom linestyle ByLevel if it hasn't been placed | Conform; Drafting Menu | 14/09/2011 |
| CADconform for MicroStation v7.01.18 | B-20111863 | Deleting all rows makes the FTE not able to export until restarted | Feature Table Editor | 13/10/2011 |
| CADconform for MicroStation v7.01.18 | B-20111865 | The Change Feature Table option does not allow rebranding of branded files | Conform; Drafting Menu | 13/10/2011 |
| CADconform for MicroStation v7.01.18 | B-20111860 | String filter does not update feature list when resizing | Drafting Menu | 6/10/2011 |
| CADconform for MicroStation v7.01.18 | B-20111861 | Double-cross on report fail option always shows ON even when OFF | Preferences | 7/10/2011 |
| CADconform for MicroStation v7.01.18 | B-20111862 | Report may produce spurious marker/watermark errors | Watermarking | 7/10/2011 |
| CADconform for MicroStation v7.01.18 | B-20111858 | Drafting to 'dimension style: none' does not work | Drafting Menu | 5/10/2011 |
| CADconform for MicroStation v7.01.18 | B-20111859 | String filter does not clear when drafting menu is shrunk to hide it | Drafting Menu | 6/10/2011 |
| CADconform for MicroStation v7.01.18 | B-20111857 | Crash when exporting either CSV or TXT report but not both | Batch Processor | 5/10/2011 |
| CADconform for MicroStation v7.01.18 | B-20111875 | Drafting menu becomes unresponsive when the FTE window is closed | Drafting Menu; Feature Table Editor | 27/10/2011 |
| CADconform for MicroStation v7.01.18 | B-20111864 | Deleting all rows should be disabled if multiple tables are loaded | Feature Table Editor | 13/10/2011 |
| CADconform for MicroStation v7.01.18 | B-20101692 | Rotated watermarks cause incorrect invalidation slash | Watermarking | 7/10/2011 |
| CADconform for MicroStation v7.01.18 | B-20111856 | HTML Report may not show colour ranges if the primary colour is ByLevel | HTML Reports | 15/09/2011 |
| CADconform for MicroStation v7.01.17 | B-20111851 | DWG Hatching may make cell definition checking fail | Conform | 25/08/2011 |
| CADconform for MicroStation v7.01.17 | B-20111850 | Cells containing nested shared cells may not pass cell definition checking | Conform | 25/08/2011 |
| CADconform for MicroStation v7.01.17 | B-20111849 | 3D cells may not match on definition when cell cache is enabled | Conform | 25/08/2011 |
| CADconform for MicroStation v7.01.17 | B-20111848 | Changing the level or linestyle toggles may cause a crash | Feature Table Editor | 25/08/2011 |
| CADconform for MicroStation v7.01.17 | B-20111854 | Symbology ranges show active ByLevel settings, not the current feature level | Feature Table Editor | 30/08/2011 |
| CADconform for MicroStation v7.01.17 | B-20111853 | Choose cell dialog may pop up unexpectedly during Conforming | Conform | 30/08/2011 |
| CADconform for MicroStation v7.01.17 | B-20111852 | Possible crash when switching branded DGNs with drafting menu open | Drafting Menu | 25/08/2011 |
| CADconform for MicroStation v7.01.16 | B-20111846 | Background batch processing clears the current user's password | Batch Processor | 15/08/2011 |
| CADconform for MicroStation v7.01.16 | B-20111847 | Replacing dimensions may reset the master/sub unit overrides | Conform | 23/08/2011 |
| CADconform for MicroStation v7.01.15 | B-20111844 | Conform cannot fix a colour table if the capability is disabled by the workspace | Conform | 10/08/2011 |
| CADconform for MicroStation v7.01.15 | B-20111845 | Colour table remapping was not using the correct values for the new table | Conform | 10/08/2011 |
| CADconform for MicroStation v7.01.14 | B-20111834 | Cannot apply new dimension style to previous unnamed dimension style | Conform | 28/07/2011 |
| CADconform for MicroStation v7.01.14 | B-20111843 | Dimension font colour may not conform correctly for named dimension styles | Conform | 28/07/2011 |
| CADconform for MicroStation v7.01.13 | B-20111837 | Cached cells may repopulate for every conform operation | Conform | 11/07/2011 |
| CADconform for MicroStation v7.01.13 | B-20111840 | Possible crash with many branded tables in one design file | Feature Table Mgr | 13/07/2011 |
| CADconform for MicroStation v7.01.13 | B-20111841 | Possible crash when checking dimensions with zero stack offset | Conform; Reporting | 26/07/2011 |
| CADconform for MicroStation v7.01.13 | B-20111842 | Automatic copying of Data Fields may replace text contents unnecessarily | Conform; Reporting | 26/07/2011 |
| CADconform for MicroStation v7.01.13 | B-20111838 | Cached cells may not be found when wildcards are used in MS_CELLLIST | Conform | 11/07/2011 |
| CADconform for MicroStation v7.01.12 | B-20111836 | Don't check design file name for self-attached reference files | Reporting | 4/07/2011 |
| CADconform for MicroStation v7.01.12 | B-20111830 | ByLevel values may result in a match score above 100% | Conform | 8/06/2011 |
| CADconform for MicroStation v7.01.12 | B-20111833 | Dimensions with no text may cause a crash when checking | Conform | 1/07/2011 |
| CADconform for MicroStation v7.01.12 | B-20111835 | Reporting within a fence should disable the check inside plot boundary | Reporting | 4/07/2011 |
| CADconform for MicroStation v7.01.11 | B-20111832 | Scan for elements outside border does not obey ref file clipping | Reporting | 28/06/2011 |
| CADconform for MicroStation v7.01.11 | B-20111828 | CADconform may not display all icons if updated from the server automatically | Tool Palettes | 25/05/2011 |
| CADconform for MicroStation v7.01.11 | B-20111829 | Cached cell files containing text require deletion to conform properly | Conform | 25/05/2011 |
| CADconform for MicroStation v7.01.10 | B-20111827 | Conform preview may not show text with missing font correctly | Conform | 10/05/2011 |
| CADconform for MicroStation v7.01.10 | B-20111826 | Conform preview may not show element with zero width or height | Conform | 10/05/2011 |
| CADconform for MicroStation v7.01.07 | B-20111824 | Adding a suggested feature may cause a crash | Conform | 6/05/2011 |
| CADconform for MicroStation v7.01.07 | B-20111822 | Setting the active text slant in V8i was overriding other text settings | Drafting Menu | 5/05/2011 |
| CADconform for MicroStation v7.01.07 | B-20111825 | Branded disallowed tables do not always display as an error | Branding; Feature Table Mgr | 9/05/2011 |
| CADconform for MicroStation v7.01.07 | B-20111823 | Checking cell score may create endless loop in Conform | Conform | 6/05/2011 |
| CADconform for MicroStation v7.01.06 | B-20111817 | Some watermark cells may cause immediate invalidation | Watermarking | 19/04/2011 |
| CADconform for MicroStation v7.01.06 | B-20111818 | Dimension line symbology may report as incorrect | Conform | 20/04/2011 |
| CADconform for MicroStation v7.01.06 | B-20111819 | Copy/paste may reverse order of features | Feature Table Editor | 20/04/2011 |
| CADconform for MicroStation v7.01.06 | B-20111820 | Conform hide button may hide all elements for numeric named levels | Conform | 21/04/2011 |
| CADconform for MicroStation v7.01.05 | B-20111791 | Possible crash when reading dimensions with a missing font | Conform | 11/04/2011 |
| CADconform for MicroStation v7.01.05 | B-20111788 | Cache files may refuse to load for feature tables with 26 entries | Databases | 21/03/2011 |
| CADconform for MicroStation v7.01.05 | B-20111790 | CADconform update may not write out local config file properly | Configuration | 5/04/2011 |
| CADconform for MicroStation v7.01.05 | B-20111789 | Possible crash when conforming text with a missing font | Conform | 22/03/2011 |
| CADconform for MicroStation v7.01.04 | B-20111786 | Correct cell name is not selected when the cell selector dialog is opened | Conform | 14/03/2011 |
| CADconform for MicroStation v7.01.04 | B-20111787 | Possible crash on conforming of text with size ranges | Conform | 14/03/2011 |
| CADconform for MicroStation v7.01.04 | B-20111781 | Crash when synchronising an external SQL Server database | Databases | 9/02/2011 |
| CADconform for MicroStation v7.01.04 | B-20111784 | Resizing of group-boxes does not repaint the screen properly | Preferences | 15/02/2011 |
| CADconform for MicroStation v7.01.04 | B-20111780 | Settings will not be saved if a previous save file is not found | Other | 9/02/2011 |
| CADconform for MicroStation v7.01.04 | B-20111779 | Conform preview does not show details for zero sized elements | Conform | 1/02/2011 |
| CADconform for MicroStation v7.01.04 | B-20111783 | Text colour may not be set correctly | Conform | 15/02/2011 |
| CADconform for MicroStation v7.01.04 | B-20111777 | The cell library path may be clipped if a matching file exists in the MS_CELL path | Feature Table Editor; User Manager | 31/01/2011 |
| CADconform for MicroStation v7.01.04 | B-20111778 | Colour table prompt appears when colour table can't be fixed (e.g. DWG mode) | Conform | 1/02/2011 |
| CADconform for MicroStation v7.01.04 | B-20111776 | Watermark text substitution may sometimes fail | Watermarking | 29/01/2011 |
| CADconform for MicroStation v7.01.03 | B-20111774 | Removing watermarks may still trigger a watermark invalidation warning | Watermarking | 28/01/2011 |
| CADconform for MicroStation v7.01.03 | B-20111775 | Possible crash when watermarking with substituted watermark text | Watermarking | 28/01/2011 |
| CADconform for MicroStation v7.01.02 | B-20111773 | Dimension text size may be erroneously matched with '1.0' size | Conform | 25/01/2011 |
| CADconform for MicroStation v7.01.02 | B-20111772 | Improved granularity of match scoring of text and cell scales | Conform | 25/01/2011 |
| CADconform for MicroStation v7.01.02 | B-20111769 | Conform-by-ranges dialog may cause crash if no dimension styles defined | Conform | 10/01/2011 |
| CADconform for MicroStation v7.01.02 | B-20111768 | Crash when switching models and fixing colour tables | Conform | 10/01/2011 |
| CADconform for MicroStation v7.01.02 | B-20111771 | Conform may crash when checking an activated reference file | Conform | 20/01/2011 |
| CADconform for MicroStation v7.01.02 | B-20111770 | Dimensions with edited and overridden text settings may not be detected | Conform | 27/01/2011 |
| CADconform for MicroStation v7.01.01 | B-20101761 | The option to disallow user defined drawing scales does not work | Conform | 13/12/2010 |
| CADconform for MicroStation v7.01.01 | B-20101765 | Potential crash in the login dialog when user groups are not defined | Login | 17/12/2010 |
| CADconform for MicroStation v7.01.01 | B-20101757 | Batch processing of branded DGNs may produce database warning | Batch Processor | 9/12/2010 |
| CADconform for MicroStation v7.01.01 | B-20101758 | Restarting Conform may prompt for 'Next' unnecessarily | Conform | 10/12/2010 |
| CADconform for MicroStation v7.01.01 | B-20101763 | Windows authentication failure may prevent group login from succeeding | Login | 16/12/2010 |
| CADconform for MicroStation v7.01.01 | B-20101759 | Conforming a text node with no text height set may cause a crash | Conform | 10/12/2010 |
| CADconform for MicroStation v7.01.01 | B-20101766 | Branding should not switch tables when the FTE is open | Branding; Feature Table Editor | 29/12/2010 |
| CADconform for MicroStation v7.01.01 | B-20101756 | Conforming colour tables in sheet models may not fix background colour | Conform | 9/12/2010 |
| CADconform for MicroStation v7.01.01 | B-20101755 | Crash when saving DWG to DGN with incorrect colour tables | Conform | 8/12/2010 |
| CADconform for MicroStation v7.01.01 | B-20101754 | Colour table prompts may reappear multiple times when a read-only file is opened | Conform | 8/12/2010 |
| CADconform for MicroStation v7.01.01 | B-20101762 | Tool boxes may open the first time with zero width/height | Tool Palettes | 17/12/2010 |
| CADconform for MicroStation v7.01.01 | B-20101767 | Dimensions with 'no style' defined cannot be conformed | Conform | 28/12/2010 |
| CADconform for MicroStation v7.01.00-B2 | B-20101748 | Switching branded DGNs in the report viewer may produce report warning | Reporting | 26/11/2010 |
| CADconform for MicroStation v7.01.00-B2 | B-20101745 | Auto-start option may not work | Configuration | 24/11/2010 |
| CADconform for MicroStation v7.01.00-B2 | B-20101747 | Text output from reports produces spurious error when no output path defined | Reporting | 25/11/2010 |
| CADconform for MicroStation v7.01.00-B2 | B-20101746 | The Batch Unbranding command does not work | Branding | 24/11/2010 |
| CADconform for MicroStation v7.01.00-B2 | B-20101742 | The feature filter may not show used features that are not level-checked | Drafting Menu | 15/11/2010 |
| CADconform for MicroStation v7.01.00-B2 | B-20101713 | Conform match scoring does not sort single digits below double digits | Conform | 5/10/2010 |
| CADconform for MicroStation v7.01.00-B2 | B-20101752 | Show used features will show features nested in cells | Drafting Menu | 2/12/2010 |
| CADconform for MicroStation v7.01.00-B2 | B-20101712 | CSV import does not support element types ranges without square brackets | Feature Table Editor | 27/09/2010 |
| CADconform for MicroStation v7.01.00-B1 | B-20101701 | Replacing a cell may make hidden levels visible | Conform | 16/08/2010 |
| CADconform for MicroStation v7.01.00-B1 | B-20101702 | Text size may change on Conform when size is not specified | Conform | 17/08/2010 |
| CADconform for MicroStation v7.01.00-B1 | B-20101690 | Importing tables from DICT file showed double the number of features | Feature Table Mgr | 28/07/2010 |
| CADconform for MicroStation v7.01.00-B1 | B-20101691 | B-spline knots may appear to be on the wrong level in a cell | Conform | 29/07/2010 |
| CADconform for MicroStation v7.01.00-B1 | B-20101693 | Branded design files may prompt for the tables unnecessarily | Branding | 30/07/2010 |
| CADconform for MicroStation v7.01.00-B1 | B-20101694 | Tables that are not allowed are hidden from administrators if branding is present | Branding; Configuration | 30/07/2010 |
| CADconform for MicroStation v7.01.00 | B-20101753 | Conform dialog resizes incorrectly in XM with >= 12 pt font | Conform | 3/12/2010 |
| CADconform for MicroStation v7.01.00 | B-20101751 | Showing used features may ignore some cells | Drafting Menu | 1/12/2010 |
| CADconform for MicroStation v7.00.27 | B-20101749 | Draft menu may show uninitialised feature names | Drafting Menu | 26/11/2010 |
| CADconform for MicroStation v7.00.27 | B-20101750 | Visual Studio 2003 runtime must be installed or CADconform will not load | Configuration | 30/11/2010 |
| CADconform for MicroStation v7.00.27 | B-20101743 | Crash when opening Draft on startup with a branded model | Drafting Menu | 18/11/2010 |
| CADconform for MicroStation v7.00.26 | B-20101740 | Scanning certain levels does not always work reliably | Conform; Reporting | 8/11/2010 |
| CADconform for MicroStation v7.00.26 | B-20101741 | MicroStation may hang on first loading of CADconform | Configuration | 9/11/2010 |
| CADconform for MicroStation v7.00.25 | B-20091488 | HTML Report has the page title set to 'DGNconform' | HTML Reports | 5/01/2011 |
| CADconform for MicroStation v7.00.25 | B-20101737 | HTML report does not work on newer table formats | HTML Reports | 5/11/2010 |
| CADconform for MicroStation v7.00.25 | B-20101738 | Text nodes may get dropped to text elements in V8i during conforming | Conform | 5/11/2010 |
| CADconform for MicroStation v7.00.24 | B-20101735 | Conforming text nodes may not fix the line-spacing | Conform | 26/10/2010 |
| CADconform for MicroStation v7.00.24 | B-20101736 | Conforming text nodes may crash on text longer than 256 characters | Conform | 26/10/2010 |
| CADconform for MicroStation v7.00.23 | B-20101730 | ByLevel weight is not set correctly in German | Drafting Menu | 19/10/2010 |
| CADconform for MicroStation v7.00.22 | B-20101716 | Batch reporting API may crash when using wildcards in design file names | API | 11/10/2010 |
| CADconform for MicroStation v7.00.22 | B-20101717 | Placing a text-style the first time in V8i may not get set correctly | Drafting Menu | 12/10/2010 |
| CADconform for MicroStation v7.00.22 | B-20101718 | Tags attached to excluded cells were not ignored for watermarking | Watermarking | 13/10/2010 |
| CADconform for MicroStation v7.00.22 | B-20101719 | Feature table may load twice after suggesting a feature | Conform | 14/10/2010 |
| CADconform for MicroStation v7.00.22 | B-20101720 | Sometimes reviewing added features shows no tables loaded | Conform | 14/10/2010 |
| CADconform for MicroStation v7.00.22 | B-20101729 | Sometimes reviewing added features showed an empty duplicate table | Conform | 14/10/2010 |
| CADconform for MicroStation v7.00.22 | B-20101715 | Cancelling the choose cell option causes the full path of the library to display | Feature Table Editor | 5/10/2010 |
| CADconform for MicroStation v7.00.21 | B-20101709 | Evaluation licence files are only accepted if entered manually | Licensing | 17/09/2010 |
| CADconform for MicroStation v7.00.21 | B-20101710 | Warnings appear when opening a dimension in the Feature Table Editor | Feature Table Editor | 17/09/2010 |
| CADconform for MicroStation v7.00.20 | B-20101684 | Drafted commands send an unnecessary null keyin to macros | Drafting Menu | 2/07/2010 |
| CADconform for MicroStation v7.00.20 | B-20101688 | Matching of border sheets fails after the first entry with no file name | Drawing Scale | 14/07/2010 |
| CADconform for MicroStation v7.00.20 | B-20101700 | Crash when attempting to fix text node with one specific design file | Conform | 16/08/2010 |
| CADconform for MicroStation v7.00.20 | B-20101708 | The 'force colour override' option for text-styles did not support ByLevel | Drafting Menu | 15/09/2010 |
| CADconform for MicroStation v7.00.20 | B-20101707 | Drafting text-styles does not work in XM | Drafting Menu | 15/09/2010 |
| CADconform for MicroStation v7.00.19 | B-20101704 | The report database defaults to match the feature database | Reporting | 14/09/2010 |
| CADconform for MicroStation v7.00.19 | B-20101706 | Appending existing reports produces a scale SQL error | Reporting | 14/09/2010 |
| CADconform for MicroStation v7.00.19 | B-20101705 | Cache files may produce tamper warning | Feature Table Mgr | 14/09/2010 |
| CADconform for MicroStation v7.00.18 | B-20101703 | Intermittent crash or hang after successful login | Login | 9/09/2010 |
| CADconform for MicroStation v7.00.16 | B-20101683 | Fixed database problem with missing spaces in PowerDraft | Databases | 30/06/2010 |
| CADconform for MicroStation v7.00.15 | B-20101677 | Crash when running report with multiple design files and models | Reporting | 30/05/2010 |
| CADconform for MicroStation v7.00.15 | B-20101678 | Possible Database exception when reporting | Reporting | 30/05/2010 |
| CADconform for MicroStation v7.00.15 | B-20101676 | The debug log may cause a crash in non-PowerDraft builds during reports | Reporting | 30/05/2010 |
| CADconform for MicroStation v7.00.14 | B-20101669 | Reporting incorrectly guesses the Default model as the last active model | Reporting; Watermarking | 17/05/2010 |
| CADconform for MicroStation v7.00.13 | B-20101674 | Drawing scale error reports incorrect design file | Reporting | 18/05/2010 |
| CADconform for MicroStation v7.00.12 | B-20101668 | Raster frame warning may appear multiple times in a batch certify | Watermarking | 17/05/2010 |
| CADconform for MicroStation v7.00.12 | B-20101671 | User password files are written out incorrectly | User Manager | 13/05/2010 |
| CADconform for MicroStation v7.00.12 | B-20101670 | Text styles with spaces in the name do not draft in V8i | Drafting Menu | 13/05/2010 |
| CADconform for MicroStation v7.00.12 | B-20101673 | Marker cells were not writing attributes correctly | Watermarking | 14/05/2010 |
| CADconform for MicroStation v7.00.12 | B-20101667 | Changing text style range cancels conform-by-select tool | Drafting Menu | 12/05/2010 |
| CADconform for MicroStation v7.00.11 | B-20101666 | Replacing dimension styles may fail in V8i | Conform | 4/05/2010 |
| CADconform for MicroStation v7.00.11 | B-20101664 | Crash when changing dimension styles in FTE | Feature Table Editor | 29/04/2010 |
| CADconform for MicroStation v7.00.11 | B-20101665 | Conform may prompt to save changes to Feature Tables unnecessarily | Conform; Feature Table Editor | 29/04/2010 |
| CADconform for MicroStation v7.00.11 | B-20101662 | The set text colour command does not work in V8i | Drafting Menu | 26/04/2010 |
| CADconform for MicroStation v7.00.07 | B-20101661 | Remapping the colour table may crash with BYLEVEL colours | Other | 20/04/2010 |
| CADconform for MicroStation v7.00.07 | B-20101660 | Hide feature in view does not work in MicroStation V8i | Other | 13/04/2010 |
| CADconform for MicroStation v7.00.06 | B-20101659 | Crash in Conform-By-Ranges in V8i when active level is in a DGNLIB file | Drafting Menu | 11/09/2009 |
| CADconform for MicroStation v7.00.06 | B-20101657 | Dimension text left margin may not conform correctly | Conform | 1/04/2010 |
| CADconform for MicroStation v7.00.06 | B-20101656 | Dimension text colour may report as wrong for some dimensions | Conform | 1/04/2010 |
| CADconform for MicroStation v7.00.06 | B-20101655 | Conform cell replacement failed on 2D cells in 3D files. | Conform | 28/03/2010 |
| CADconform for MicroStation v7.00.05 | B-20101650 | Patching to a new version does not remove the local config file | Installer | 15/03/2010 |
| CADconform for MicroStation v7.00.05 | B-20101651 | CADconform matches SHX fonts before TT or RSC fonts with the same name | Conform | 18/03/2010 |
| CADconform for MicroStation v7.00.04 | B-20101648 | Dimension style overrides may require multiple Conform passes to fix | Conform | 8/03/2010 |
| CADconform for MicroStation v7.00.03 | B-20101633 | Cancelling export of feature table changes can mess up the Drafting Menu | Feature Table Editor | 15/02/2010 |
| CADconform for MicroStation v7.00.03 | B-20101638 | Drafting a level with a numbered name does not work | Drafting Menu | 24/02/2010 |
| CADconform for MicroStation v7.00.03 | B-20101637 | Macro in reporting database not set up to work with new Reports_Table structure | Databases | 18/02/2010 |
| CADconform for MicroStation v7.00.03 | B-20101634 | MicroStation 2004 may not set draft-by-ranges to ByLevel | Drafting Menu; Feature Table Mgr | 18/02/2010 |
| CADconform for MicroStation v7.00.03 | B-20101636 | Draft By Ranges Dialog: ByLevel text cut off | Drafting Menu | 24/02/2010 |
| CADconform for MicroStation v7.00.02 | B-20101627 | Text slant is set incorrectly in MicroStation V8i | Bilingual Text Tool; Reporting | 1/02/2010 |
| CADconform for MicroStation v7.00.02 | B-20101626 | Working unit labels in Design File report may be incorrect | Reporting | 1/02/2010 |
| CADconform for MicroStation v7.00.01 | B-20101625 | European characters are not supported in some dialogs | Conform | 29/01/2010 |
| CADconform for MicroStation v7.00.00-B3 | B-20101649 | Extension line symbology cannot be fixed if lines are disabled | Conform | 13/11/2009 |
| CADconform for MicroStation v7.00.00-B3 | B-20091571 | Cached dictionaries propagate multiple apostrophes in keyin commands | Feature Table Editor | 1/12/2009 |
| CADconform for MicroStation v7.00.00-B3 | B-20091564 | Dimension checking inconsistent between MS2004 and V8i | Conform; Reporting | 20/11/2009 |
| CADconform for MicroStation v7.00.00-B3 | B-20091567 | Cell definition checking inconsistent between MS2004 and V8i | Conform; Reporting | 20/11/2009 |
| CADconform for MicroStation v7.00.00-B3 | B-20091575 | Watermarks report as invalidated at Jan 1st 1970 in read-only designs | Watermarking | 7/12/2009 |
| CADconform for MicroStation v7.00.00-B3 | B-20091561 | Upgrading old CADconform to v7 may produce file copy warning | Configuration | 12/11/2009 |
| CADconform for MicroStation v7.00.00-B3 | B-20091562 | Exporting of database only occurs if something has been modified | Databases | 13/11/2009 |
| CADconform for MicroStation v7.00.00-B3 | B-20091560 | Skipping deleted elements may be very slow in V8i | Conform | 10/11/2009 |
| CADconform for MicroStation v7.00.00-B3 | B-20091563 | Extension line settings are no longer checked if extensions are disabled | Conform; Reporting | 13/11/2009 |
| CADconform for MicroStation v7.00.00-B3 | B-20091559 | Reading of text styles may cause a crash in V8i | Conform | 10/11/2009 |
| CADconform for MicroStation v7.00.00-B3 | B-20091570 | Cell selector background colour is incorrect for sheet models in MS2004 | Drafting Menu | 30/11/2009 |
| CADconform for MicroStation v7.00.00-B2 | B-20091550 | Tables with exactly 25 characters should not be allowed | Feature Table Mgr | 7/10/2009 |
| CADconform for MicroStation v7.00.00-B2 | B-20091558 | The network configuration file needs to be renamed without spaces | Configuration | 2/11/2009 |
| CADconform for MicroStation v7.00.00-B2 | B-20091557 | Deleting a report may corrupt the reports table list | Reporting | 29/10/2009 |
| CADconform for MicroStation v7.00.00-B2 | B-20091556 | Zoom-in may fail if the view window is inside-out | Conform | 28/10/2009 |
| CADconform for MicroStation v7.00.00-B2 | B-20091551 | Dimension style ranges are not found in MicroStation V8i | Feature Table Mgr | 7/10/2009 |
| CADconform for MicroStation v7.00.00-B2 | B-20091548 | Can not create new user or group | User Manager | 6/10/2009 |
| CADconform for MicroStation v7.00.00-B2 | B-20091569 | Changing the dimension font in the FTE may not work | Feature Table Editor | 21/10/2009 |
| CADconform for MicroStation v7.00.00-B2 | B-20091553 | Multiscale rounds off values to 0.001. | Drawing Scale | 7/10/2009 |
| CADconform for MicroStation v7.00.00-B2 | B-20091549 | Viewing user messages causes MicroStation V8i to crash | Messaging | 7/10/2009 |
| CADconform for MicroStation v7.00.00-B2 | B-20091552 | Viewing file history may cause MicroStation V8i to crash | File History | 7/10/2009 |
| CADconform for MicroStation v7.00.00-B2 | B-20091555 | Conform by clipping shape fails | Conform | 26/10/2009 |
| CADconform for MicroStation v7.00.00-B2 | B-20091554 | Dimension linestyle BYLEVEL may not match in Conform | Conform | 19/10/2009 |
| CADconform for MicroStation v7.00.00-B1 | B-20091499 | 'Append' privilege also requires 'Edit' privilege | Conform | 4/09/2009 |
| CADconform for MicroStation v7.00.00-B1 | B-20091539 | Text colour may not always be set correctly in WYSIWYG dialog | Drafting Menu | 23/09/2009 |
| CADconform for MicroStation v7.00.00-B1 | B-20091530 | Computer names over 15 characters are not supported | Licensing | 21/08/2009 |
| CADconform for MicroStation v7.00.00-B1 | B-20091532 | Reference file modifications may report as belonging to master model | Watermarking | 21/08/2009 |
| CADconform for MicroStation v7.00.00-B1 | B-20091533 | Reference file modifications are not counted properly | Watermarking | 21/08/2009 |
| CADconform for MicroStation v7.00.00-B1 | B-20091529 | Dimension discrepancy between Conform and Report matching | Conform; Reporting | 14/08/2009 |
| CADconform for MicroStation v7.00.00 | B-20091579 | Warning on table open when fonts don't match due to case | Feature Table Editor | 18/12/2009 |
| CADconform for MicroStation v7.00.00 | B-20091578 | Non-model shared cell instances appear as errors in a DGN | Conform | 17/12/2009 |
| CADconform for MicroStation v7.00.00 | B-20091583 | TriCAD feature tables may export as invalid dictionaries | Feature Table Editor | 23/12/2009 |
| CADconform for MicroStation v7.00.00 | B-20091585 | Placing text with linespacing defined causes drafted text to reset to size of 1.0 | Drafting Menu | 23/12/2009 |
| CADconform for MicroStation v7.00.00 | B-20091582 | Possible crash in MicroStation V8i on startup with defined border sheets | Drawing Scale | 22/12/2009 |
| CADconform for MicroStation v7.00.00 | B-20091576 | Dimension extension line setting is not saving correctly | Feature Table Editor | 10/12/2009 |
| CADconform for MicroStation v7.00.00 | B-20091580 | Branded files may show the FTM dialog unnecessarily at startup | Branding | 21/12/2009 |
| CADconform for MicroStation v7.00.00 | B-20091577 | Import dictionary results in tamper warning | Feature Table Editor | 11/12/2009 |
| CADconform for MicroStation v7.00.00 | B-20091581 | Database driver may crash XM after failing to find DSN file | Databases | 21/12/2009 |
| CADconform for MicroStation v7.00.00 | B-20101589 | Cell library path is clipped when the library is in the current directory | Feature Table Editor | 14/01/2010 |
| CADconform for MicroStation v7.00.00 | B-20101590 | Server install does not create network confioguration files | Installer | 15/01/2010 |
| CADconform for MicroStation v7.00.00 | B-20101588 | Crash in V8i when using the Batch API | Batch Processor | 5/01/2010 |
| CADconform for MicroStation v7.00.00 | B-20061028 | Tagged library cells do not Conform with 'Check Cell Definition' ON | Conform | 15/01/2010 |
| CADconform for MicroStation v7.00.00 | B-20091584 | Linespacing type keyin is garbled in DLL compile | Feature Table Editor | 23/12/2009 |
| CADconform for MicroStation v6.05.23 | B-20091538 | Crash in Draft-By-Ranges in V8i when active level is in a DGNLIB file | Drafting Menu | 11/09/2009 |
| CADconform for MicroStation v6.05.22 | B-20091537 | Fixed client cache bug where file copy went to parent of correct path | Configuration | 28/08/2009 |
| CADconform for MicroStation v6.05.22 | B-20091536 | Upgrading server version takes two restarts of MicroStation to work | Configuration | 28/08/2009 |
| CADconform for MicroStation v6.05.22 | B-20091535 | Unbranding does not work in MicroStation V8i | Branding | 27/08/2009 |
| CADconform for MicroStation v6.05.21 | B-20091534 | Crash on startup in MSV8i with branded files and text styles defined | Branding | 25/08/2009 |
| CADconform for MicroStation v6.05.20 | B-20091528 | Crash on auto-startup in V8i when using bordersheets | Drawing Scale | 10/08/2009 |
| CADconform for MicroStation v6.05.20 | B-20091527 | Batch reporting may mistake OLE2 files for V8 design files | Reporting | 6/08/2009 |
| CADconform for MicroStation v6.05.20 | B-20091524 | MicroStation V8i install is not detected if no other version is installed | Installer | 3/08/2009 |
| CADconform for MicroStation v6.05.19 | B-20091526 | Automatic server update did not work on MicroStation V8i | Configuration | 4/08/2009 |
| CADconform for MicroStation v6.05.19 | B-20091525 | Deleting a component of complex cell may delete other components | Conform | 3/08/2009 |
| CADconform for MicroStation v6.05.18 | B-20091523 | Certified DWG elements will invalidate when the drawing is reopened | Watermarking | 16/07/2009 |
| CADconform for MicroStation v6.05.18 | B-20091521 | Report database locking defaults to the feature table databases | User Manager | 16/07/2009 |
| CADconform for MicroStation v6.05.18 | B-20091520 | Reporting may produce a spurious reference file error | Reporting | 15/07/2009 |
| CADconform for MicroStation v6.05.18 | B-20091503 | The start command fails if the path begins with a double-quote | Configuration | 10/07/2009 |
| CADconform for MicroStation v6.05.18 | B-20091502 | Some CADconform commands did not work with spaces in UNC path | Configuration | 6/07/2009 |
| CADconform for MicroStation v6.05.17 | B-20091501 | Batch reporting does not automatically fetch all models correctly | API | 3/07/2009 |
| CADconform for MicroStation v6.05.17 | B-20091500 | Report to text file does not export new-lines for empty records | Reporting | 3/07/2009 |
| CADconform for MicroStation v6.05.17 | B-20091496 | Shared cell definitions were ignored even if checking was enabled | Feature Table Editor | 30/06/2009 |
| CADconform for MicroStation v6.05.17 | B-20091497 | Shared cell instances should be ignored if definitions are checked | Conform | 30/06/2009 |
| CADconform for MicroStation v6.05.17 | B-20091498 | Existing password files may produce warnings in MicroStation V8i | User Manager | 1/07/2009 |
| CADconform for MicroStation v6.05.17 | B-20091495 | Zoom-in attempts to magnify elements that have zero length | Conform | 30/06/2009 |
| CADconform for MicroStation v6.05.17 | B-20091492 | Draft-by-ranges does not always update the allowed values | Drafting Menu | 25/06/2009 |
| CADconform for MicroStation v6.05.17 | B-20091493 | DWG Hatching elements are ignored when Conforming | Conform | 29/06/2009 |
| CADconform for MicroStation v6.05.17 | B-20091494 | Zoom-out does not always work reliably | Conform | 6/07/2009 |
| CADconform for MicroStation v6.05.17 | B-20071207 | Orphan cells do not show as errors in Conform but do in Report | Conform | 2/07/2009 |
| CADconform for MicroStation v6.05.17 | B-20081329 | Conform may pass a model that Report fails if orphan cells are defined in table | Conform; Reporting | 2/07/2009 |
| CADconform for MicroStation v6.05.16 | B-20091486 | Scan period may be active even when disabled by administrator | Conform; Reporting | 26/05/2009 |
| CADconform for MicroStation v6.05.16 | B-20091487 | Batch reporting may write reports to the feature table database | Batch Processor | 8/06/2009 |
| CADconform for MicroStation v6.05.16 | B-20091490 | Model name help file is missing from the Preferences configuration file | Preferences | 11/06/2009 |
| CADconform for MicroStation v6.05.16 | B-20091485 | Inserting features in the list may mix up the display order | Feature Table Editor | 23/05/2009 |
| CADconform for MicroStation v6.05.16 | B-20091483 | Drafting Menu conform-by-selection does not support ranges | Drafting Menu | 5/06/2009 |
| CADconform for MicroStation v6.05.16 | B-20091443 | Reading a dimension causes MicroStation V8i to crash | Conform; Drafting Menu; Reporting | 28/04/2009 |
| CADconform for MicroStation v6.05.15 | B-20091480 | Double-quotes are no longer escaped in the database | Feature Table Editor | 23/04/2009 |
| CADconform for MicroStation v6.05.15 | B-20091481 | Multiple single quotes were not supported in feature names | Feature Table Editor | 23/04/2009 |
| CADconform for MicroStation v6.05.15 | B-20091482 | Opening an external document from a short path may corrupt memory | Menus / Interface | 28/04/2009 |
| CADconform for MicroStation v6.05.14 | B-20091477 | Batch API reporting does not overwrite existing reports correctly | API; Reporting | 19/04/2009 |
| CADconform for MicroStation v6.05.14 | B-20091478 | Copy file failed warning had source and destination transposed | Configuration | 20/04/2009 |
| CADconform for MicroStation v6.05.14 | B-20091479 | Backslashes were not properly escaped in the database | Feature Table Editor | 23/04/2009 |
| CADconform for MicroStation v6.05.14 | B-20091455 | Database error when locking tables by user if no database chosen | User Manager | 25/02/2009 |
| CADconform for MicroStation v6.05.14 | B-20091456 | The FTM is now bypassed if the tables are locked per user | Feature Table Mgr | 25/02/2009 |
| CADconform for MicroStation v6.05.14 | B-20091464 | Report numbers may get messed up with legacy databases | Reporting | 14/04/2009 |
| CADconform for MicroStation v6.05.14 | B-20091476 | Multiple reports with the same name may be generated | Reporting | 16/04/2009 |
| CADconform for MicroStation v6.05.14 | B-20091460 | Deleting non-empty groups may crash CADconform | Feature Table Editor | 8/04/2009 |
| CADconform for MicroStation v6.05.14 | B-20091459 | Raster frames in XM may cause watermark invalidation | Watermarking | 5/04/2009 |
| CADconform for MicroStation v6.05.14 | B-20091462 | Features names with special characters may display incorrectly | Feature Table Editor | 10/04/2009 |
| CADconform for MicroStation v6.05.14 | B-20091461 | On some displays the Drafting menu shrinks the toolbar before it is displayed | Drafting Menu | 9/04/2009 |
| CADconform for MicroStation v6.05.14 | B-20071168 | Cancelling a level table change to a certified DGN displays wrong settings | Watermarking | 8/04/2009 |
| CADconform for MicroStation v6.05.14 | B-20091458 | Removing all watermarks would prompt that watermarks may invalidate | Batch Processor | 31/03/2009 |
| CADconform for MicroStation v6.05.14 | B-20060842 | Conform is ignoring <SHIFT>ed carriage returns in text nodes | Conform | 9/04/2009 |
| CADconform for MicroStation v6.05.14 | B-20060817 | Only one feature group can be deleted at a time | Feature Table Editor | 9/04/2009 |
| CADconform for MicroStation v6.05.13 | B-20091454 | Multiple watermarks may erroneously report as having differing settings | Reporting | 12/02/2009 |
| CADconform for MicroStation v6.05.13 | B-20091453 | Multiple error messages may appear when licensing problems occur | Licensing | 12/02/2009 |
| CADconform for MicroStation v6.05.12 | B-20091572 | Cell selector preview is off-centre when the cell range is invalid | Drafting Menu | 1/12/2009 |
| CADconform for MicroStation v6.05.12 | B-20091451 | The report number is incorrect when reading legacy databases | Reporting | 11/02/2009 |
| CADconform for MicroStation v6.05.12 | B-20091450 | The user name is missing from the reports combo for legacy databases | Reporting | 11/02/2009 |
| CADconform for MicroStation v6.05.12 | B-20091449 | Text export of reports does not SQL escaped characters | Reporting | 11/02/2009 |
| CADconform for MicroStation v6.05.12 | B-20091452 | The ODBC Control Panel opens during an MSBATCH run | Batch Processor; Reporting | 11/02/2009 |
| CADconform for MicroStation v6.05.12 | B-20091448 | Text export of reports does not handle single and double quotes | Reporting | 11/02/2009 |
| CADconform for MicroStation v6.05.12 | B-20091447 | First cache of binaries may copy files to parent of desired path | Configuration | 5/02/2009 |
| CADconform for MicroStation v6.05.12 | B-20091445 | Multiscale settings do not work if built-in values are used | Drawing Scale | 4/02/2009 |
| CADconform for MicroStation v6.05.12 | B-20091444 | Fixed obscure heap corruption bug in string handling | Reporting | 2/02/2009 |
| CADconform for MicroStation v6.05.12 | B-20091446 | Watermark may report 'USER CANCELLED' when batch reporting | Reporting | 4/02/2009 |
| CADconform for MicroStation v6.05.11 | B-20091442 | Watermark and design reports show double back-slashes in the DGN path | Reporting | 23/01/2009 |
| CADconform for MicroStation v6.05.11 | B-20091441 | No warning of missing marker if another user's marker is present | Watermarking | 23/01/2009 |
| CADconform for MicroStation v6.05.11 | B-20091439 | Multiple ref files are read during batch reporting when auto-get-refs is ON | Batch Processor; Reporting | 27/01/2009 |
| CADconform for MicroStation v6.05.11 | B-20091438 | Auto-start can not be disabled without deleting the file manually | Configuration; Installer | 21/01/2009 |
| CADconform for MicroStation v6.05.11 | B-20091440 | Potential crash when reporting with multiple master/reference files | Batch Processor; Reporting | 22/01/2009 |
| CADconform for MicroStation v6.05.10 | B-20091436 | Temporary features are now purged from the feature table before certifying | Reporting | 9/01/2009 |
| CADconform for MicroStation v6.05.10 | B-20091437 | SQL error sometimes appears when first opening Report Generator | Reporting | 12/01/2009 |
| CADconform for MicroStation v6.05.07 | B-20091435 | The installer was missing a required config file | Configuration; Installer | 7/01/2009 |
| CADconform for MicroStation v6.05.06 | B-20081434 | Disabled the warning when type 66 elements are out of order | Drawing Scale | 19/12/2008 |
| CADconform for MicroStation v6.05.06 | B-20081430 | Drawing scale dialog warning appears even when not logged in | Drawing Scale | 18/12/2008 |
| CADconform for MicroStation v6.05.06 | B-20081431 | Remembered passwords may be forgotten if user does not log in | Login | 18/12/2008 |
| CADconform for MicroStation v6.05.06 | B-20081429 | Naming convention check may fail if substrings are at beginning | Conform | 17/12/2008 |
| CADconform for MicroStation v6.05.06 | B-20081433 | Importing a CSV and then adding a feature may confuse the feature order | Feature Table Editor | 19/12/2008 |
| CADconform for MicroStation v6.05.06 | B-20081427 | CSV import has an internal limit of 17 input columns | Feature Table Editor | 11/12/2008 |
| CADconform for MicroStation v6.05.06 | B-20081426 | Importing a dimension with a style may be misinterpreted as a text feature | Feature Table Editor | 10/12/2008 |
| CADconform for MicroStation v6.05.06 | B-20081432 | Naming convention check disallows wildcards in substring ranges | Conform | 17/12/2008 |
| CADconform for MicroStation v6.05.05 | B-20081422 | Share folder creation may fail if a shared CADconform folder exists | Installer | 12/11/2008 |
| CADconform for MicroStation v6.05.05 | B-20081423 | Share folder creation fails if the install path is to a remote machine | Installer | 18/11/2008 |
| CADconform for MicroStation v6.05.05 | B-20081424 | Drawing scale warning may appear twice in a row | Drawing Scale | 20/11/2008 |
| CADconform for MicroStation v6.05.05 | B-20081425 | Sometimes the reporting displays a message 'No report name given' | Reporting | 21/11/2008 |
| CADconform for MicroStation v6.05.04 | B-20081421 | Drawing scale is now initialised properly when reporting | Drawing Scale | 10/11/2008 |
| CADconform for MicroStation v6.05.04 | B-20081420 | Command features were exported incorrectly for AutoCAD compatibility | Feature Table Editor | 6/11/2008 |
| CADconform for MicroStation v6.05.04 | B-20081419 | 'Subscript out of range' error on empty HTML report | HTML Reports | 3/11/2008 |
| CADconform for MicroStation v6.05.04 | B-20081411 | The cache, log and settings configs were not defined in v6.5 | Configuration | 22/10/2008 |
| CADconform for MicroStation v6.05.04 | B-20081410 | Log files may be written to Bentley path if the client path is undefined | Configuration | 22/10/2008 |
| CADconform for MicroStation v6.05.04 | B-20081409 | Drag and drop does not work in XM | Reporting | 24/10/2008 |
| CADconform for MicroStation v6.05.04 | B-20071247 | A semi-colon in a feature name messes up the HTML report's colour column | HTML Reports | 3/11/2008 |
| CADconform for MicroStation v6.05.03 | B-20081402 | Certifying with the fence toggle on may result in a spurious error message | Reporting | 24/09/2008 |
| CADconform for MicroStation v6.05.03 | B-20081400 | Conform-by-ranges does not apply dimension text size correctly | Conform | 23/09/2008 |
| CADconform for MicroStation v6.05.03 | B-20081399 | Conform-by-ranges default dimension text size is incorrect | Conform | 23/09/2008 |
| CADconform for MicroStation v6.05.03 | B-20081398 | Conform-by-ranges text size dialog is too small | Conform | 23/09/2008 |
| CADconform for MicroStation v6.05.03 | B-20081408 | Scan period would get the wrong file creation date under some conditions | Conform; Reporting | 26/09/2008 |
| CADconform for MicroStation v6.05.03 | B-20081407 | Date of v8 conversion checking is wrong when whole file has been modified | Conform; Reporting | 26/09/2008 |
| CADconform for MicroStation v6.05.03 | B-20081397 | Draft-by-ranges does not display the linestyle BYLEVEL option correctly | Conform; Drafting Menu | 22/09/2008 |
| CADconform for MicroStation v6.05.03 | B-20081401 | Conform does not support error tolerance when matching within ranges | Conform | 23/09/2008 |
| CADconform for MicroStation v6.05.03 | B-20081396 | Draft-by-ranges does not always synchronise the BYLEVEL preview | Drafting Menu | 22/09/2008 |
| CADconform for MicroStation v6.05.03 | B-20081403 | Conform-by-ranges does not always synchronise the BYLEVEL preview | Drafting Menu | 22/09/2008 |
| CADconform for MicroStation v6.05.03 | B-20081405 | Conform-by-ranges does not display BYLEVEL linestyles other than zero | Conform | 25/09/2008 |
| CADconform for MicroStation v6.05.03 | B-20081404 | Draft-by-ranges does not display BYLEVEL linestyles other than zero | Drafting Menu | 25/09/2008 |
| CADconform for MicroStation v6.05.02 | B-20081394 | Dimension match scoring was missing some criteria | Conform | 15/09/2008 |
| CADconform for MicroStation v6.05.02 | B-20081391 | Dimension style would not be reapplied properly on Conform | Conform | 4/09/2008 |
| CADconform for MicroStation v6.05.02 | B-20081389 | MicroStation J files would report as being created in the year 0000. | File History | 1/09/2008 |
| CADconform for MicroStation v6.05.02 | B-20081388 | Crash if no decimal place found in a mandatory drawing scale value | Drawing Scale | 28/08/2008 |
| CADconform for MicroStation v6.05.02 | B-20081395 | Cell scale does not allow some valid values in Conform | Conform | 18/09/2008 |
| CADconform for MicroStation v6.05.02 | B-20081393 | Some watermarks report as 'Not a watermark' | Watermarking | 18/09/2008 |
| CADconform for MicroStation v6.05.02 | B-20081392 | Reporting will not work if a branded DGN can not attach to database | Reporting | 5/09/2008 |
| CADconform for MicroStation v6.05.01 | B-20081386 | Auto-update now allows differing client and server versions | Configuration | 19/08/2008 |
| CADconform for MicroStation v6.05.01 | B-20081387 | Fixed string buffer overflow in CSV level name import > 64 characters | Feature Table Editor | 19/08/2008 |
| CADconform for MicroStation v6.05.00 Beta 2 | B-20081384 | Switching Text style ranges does not reinitialise text style overrides | Drafting Menu | 25/07/2008 |
| CADconform for MicroStation v6.05.00 Beta 2 | B-20081383 | Text style must exist before changing to it using a text style range | Drafting Menu | 25/07/2008 |
| CADconform for MicroStation v6.05.00 Beta 2 | B-20081366 | Multiple user are not supported properly on the same machine | Configuration | 7/08/2008 |
| CADconform for MicroStation v6.05.00 Beta 2 | B-20081377 | Selecting one of multiple colour tables to replace only worked on the last choice | Conform | 28/05/2008 |
| CADconform for MicroStation v6.05.00 Beta 2 | B-20081323 | File name checking is very slow with hundreds of '|' wildcards in convention string | Conform | 18/06/2008 |
| CADconform for MicroStation v6.05.00 Beta 2 | B-20081382 | Multiple text styles are displayed when defined in both DGNLIB and DGN | Feature Table Editor | 25/07/2008 |
| CADconform for MicroStation v6.05.00 Beta 2 | B-20081379 | Text with linespacing set to zero will pass the linespacing checking | Conform | 23/06/2008 |
| CADconform for MicroStation v6.05.00 Beta 2 | B-20081378 | Conform did not score on line style scale matching | Conform | 18/06/2008 |
| CADconform for MicroStation v6.05.00 Beta 2 | B-20081381 | Balloon help for icons displays in MicroStation 2004 but not in XM | Tool Palettes | 22/07/2008 |
| CADconform for MicroStation v6.05.00 Beta 1 | B-20081376 | Incompatible feature types may be matched if allowed by the database | Conform | 23/05/2008 |
| CADconform for MicroStation v6.05.00 Beta 1 | B-20081375 | Dimension style overrides are no longer set on conforming | Conform | 22/05/2008 |
| CADconform for MicroStation v6.05.00 Beta 1 | B-20081373 | CSV import of ranges does not match the CADconform export format | Feature Table Editor | 21/05/2008 |
| CADconform for MicroStation v6.05.00 Beta 1 | B-20081374 | Dimension styles with spaces do not work in XM | Drafting Menu | 22/05/2008 |
| CADconform for MicroStation v6.04.25 | B-20081385 | Models are not appearing in report after selection | Reporting | 6/08/2008 |
| CADconform for MicroStation v6.04.23 | B-20081364 | Invalidation cross has incorrect range when design exceeds a 32 bit plane | Watermarking | 29/04/2008 |
| CADconform for MicroStation v6.04.23 | B-20081360 | CSV export disorientates German version of Excel due to extra semi-colon | Feature Table Editor | 9/04/2008 |
| CADconform for MicroStation v6.04.23 | B-20081361 | XM login combobox sometimes ignores mouse-clicks | Login | 16/04/2008 |
| CADconform for MicroStation v6.04.23 | B-20081365 | Invalidation cross may have incorrect range when view is rotated | Watermarking | 29/04/2008 |
| CADconform for MicroStation v6.04.23 | B-20081362 | Place marker cell may crash MicroStation XM on Windows Vista | Watermarking | 16/04/2008 |
| CADconform for MicroStation v6.04.23 | B-20081367 | The active angle command is not allowed in text features | Feature Table Editor | 7/05/2008 |
| CADconform for MicroStation v6.04.23 | B-20081368 | Draft with active text slant does not work in MicroStation 2004 and above | Drawing Scale | 30/04/2008 |
| CADconform for MicroStation v6.04.23 | B-20081371 | Text styles defined in active DGN but not DGNLIB may not display | Feature Table Editor | 6/05/2008 |
| CADconform for MicroStation v6.04.23 | B-20081372 | Match on cell angle would fail if the differences were within error tolerance | Conform | 7/05/2008 |
| CADconform for MicroStation v6.04.23 | B-20081369 | Cells with tags may fail cell definition checking | Conform | 5/05/2008 |
| CADconform for MicroStation v6.04.23 | B-20081370 | Database import changes DSN and creates errors on database export | Feature Table Editor | 8/05/2008 |
| CADconform for MicroStation v6.04.22 | B-20081352 | Error at login in MS2004 - '...MDL loader for the server is not active' | Login | 3/03/2008 |
| CADconform for MicroStation v6.04.22 | B-20081349 | Text colour may cause cell definition matching to fail when colour table differs | Conform | 26/02/2008 |
| CADconform for MicroStation v6.04.22 | B-20081350 | An invalid server path can not be corrected through the 'Configure' dialog | Configuration | 27/02/2008 |
| CADconform for MicroStation v6.04.22 | B-20081359 | Multiscale with ranges may act inconsistant for non-unary scales | Conform; Reporting | 4/04/2008 |
| CADconform for MicroStation v6.04.20 | B-20081335 | Compiled Help file can not be opened across a network with high security settings | Documentation | 20/02/2008 |
| CADconform for MicroStation v6.04.20 | B-20081344 | The 'DOS' keyin no longer allows quotes in PowerDraft XM | Configuration | 22/02/2008 |
| CADconform for MicroStation v6.04.20 | B-20081336 | Date discrepancy between US locale settings and Preferences dialog | Configuration | 15/02/2008 |
| CADconform for MicroStation v6.04.19 | B-20081334 | CADconform unloads when adding a very long text node to the feature table | Feature Table Editor | 12/02/2008 |
| CADconform for MicroStation v6.04.18 | B-20071318 | Prefs dialog does not support non-US date formats | Configuration | 31/01/2008 |
| CADconform for MicroStation v6.04.18 | B-20081330 | Watermark cells containing BSpline knots may invalidate immediately | Watermarking | 30/01/2008 |
| CADconform for MicroStation v6.04.18 | B-20081331 | Watermarks placed manually as cells would cause instant invalidation | Watermarking | 31/01/2008 |
| CADconform for MicroStation v6.04.18 | B-20081328 | Barmenu files import commands as cells when the command sets the active scale | Feature Table Editor | 24/01/2008 |
| CADconform for MicroStation v6.04.18 | B-20081332 | Scan period would display the wrong month under certain conditions | Conform | 31/01/2008 |
| CADconform for MicroStation v6.04.17 | B-20081327 | Fixed minor level caching bug in Level List combo-box | Feature Table Editor | 22/01/2008 |
| CADconform for MicroStation v6.04.17 | B-20081325 | User can no longer add 0.0 as a multiscale | Drawing Scale | 18/01/2008 |
| CADconform for MicroStation v6.04.17 | B-20081322 | CADconform crashes with predefined drawing scales greater than 128 characters | Drawing Scale | 17/01/2008 |
| CADconform for MicroStation v6.04.17 | B-20081324 | Invalidation double cross may inherit cell scale for second slash | Watermarking | 17/01/2008 |
| CADconform for MicroStation v6.04.17 | B-20081321 | Invalidation slash is too large with some watermarks | Watermarking | 16/01/2008 |
| CADconform for MicroStation v6.04.15 | B-20071319 | Focus help was missing from text and cell advanced options dialogs | Feature Table Editor | 5/12/2007 |
| CADconform for MicroStation v6.04.14 | B-20071317 | Certify permanently disables date scanning for the current session | Reporting | 20/11/2007 |
| CADconform for MicroStation v6.04.14 | B-20071316 | Predefined scan period does not read correctly from config file | Configuration | 20/11/2007 |
| CADconform for MicroStation v6.04.13 | B-20071315 | Scale is no longer applied twice when it matches using Conform By Ranges | Conform | 19/11/2007 |
| CADconform for MicroStation v6.04.13 | B-20071314 | User is prompted to login on a clean install even when no login exists | User Manager | 19/11/2007 |
| CADconform for MicroStation v6.04.12 | B-20071310 | German installer does not allow new network install of server and client | Installer | 16/11/2007 |
| CADconform for MicroStation v6.04.12 | B-20071312 | German build would fail to load CADconform.dll with error 127 | Installer | 16/11/2007 |
| CADconform for MicroStation v6.04.12 | B-20071311 | German installer prompts for MSJ path when MS2004 is installed | Installer | 16/11/2007 |
| CADconform for MicroStation v6.04.11 | B-20071304 | Watermarks may invalidate when switching DGNs under XM | Watermarking | 7/11/2007 |
| CADconform for MicroStation v6.04.11 | B-20071303 | Watermarks from previous versions may invalidate in MicroStation XM | Watermarking | 5/11/2007 |
| CADconform for MicroStation v6.04.11 | B-20071308 | Watermark cross scale may be wrong for watermark cells containing raster | Watermarking | 9/11/2007 |
| CADconform for MicroStation v6.04.11 | B-20071307 | Conform should prompt for scale when a multiscale is set and scale is applied | Conform | 8/11/2007 |
| CADconform for MicroStation v6.04.11 | B-20071309 | Level numbers above 1 million are not supported in level checking | Conform | 15/11/2007 |
| CADconform for MicroStation v6.04.10 | B-20071300 | Importing cell libraries did not strip path if defined in $(MS_CELL) in MS2004 | Feature Table Editor | 1/11/2007 |
| CADconform for MicroStation v6.04.10 | B-20071254 | Associative dimensions sometimes update on file open, invalidating watermarks | Watermarking | 31/10/2007 |
| CADconform for MicroStation v6.04.10 | B-20071301 | Conforming scaled dimensions may cause the scale to be applied twice | Conform | 1/11/2007 |
| CADconform for MicroStation v6.04.10 | B20060737 | Discrepancy between element count in Report and Watermark Status | Reporting; Watermarking | 31/10/2007 |
| CADconform for MicroStation v6.04.10 | B-20071299 | Total marker cell count reported does not include other user's marker cells | Watermarking | 29/10/2007 |
| CADconform for MicroStation v6.04.07 | B-20071296 | Conform would fail 2D cells placed in a 3D file if the Z scale was not zero | Conform | 22/10/2007 |
| CADconform for MicroStation v6.04.07 | B-20071295 | Conform would ignore the chosen symbology range if the previous value matched | Conform | 22/10/2007 |
| CADconform for MicroStation v6.04.06 | B-20071293 | Conforming a cell with no level defined would sometimes crash | Conform | 12/10/2007 |
| CADconform for MicroStation v6.04.06 | B-20071294 | Conform did not support graphic cells placed relative | Conform | 12/10/2007 |
| CADconform for MicroStation v6.04.05 | B-20071291 | Setting the server to a non-existent version meant you couldn't set it back | Configuration | 9/10/2007 |
| CADconform for MicroStation v6.04.05 | B-20071292 | Replacing a cell with the same name would sometimes crash or behave oddly | Conform | 10/10/2007 |
| CADconform for MicroStation v6.04.04 | B-20071290 | Watermark invalidation can occur when orphan cell components are mis-counted | Watermarking | 8/10/2007 |
| CADconform for MicroStation v6.04.04 | B-20071289 | Watermark invalidation can occur when exclusion cells match current config | Watermarking | 8/10/2007 |
| CADconform for MicroStation v6.04.03 | B-20071287 | Conform Change-All produces spurious warnings for certain orphan cell components | Conform | 4/10/2007 |
| CADconform for MicroStation v6.04.03 | B-20071285 | Marker cells belonging to other users were getting checksummed erroneously | Watermarking | 28/09/2007 |
| CADconform for MicroStation v6.04.03 | B-20071288 | Occasional unwanted watermark invalidation on reference files | Watermarking | 5/10/2007 |
| CADconform for MicroStation v6.04.03 | B-20071286 | Watermarks may invalidate if active exclusion cells differ from watermark's | Watermarking | 2/10/2007 |
| CADconform for MicroStation v6.04.02 | B-20071280 | Histogram does not display bars correctly in MicroStation XM | Other | 24/09/2007 |
| CADconform for MicroStation v6.04.02 | B-20071282 | There is no restriction on cell scales entered by the CADconform Cell Selector | Conform | 27/09/2007 |
| CADconform for MicroStation v6.04.02 | B-20071283 | Fixing a cell in Conform does not always retain previous cell scale | Conform | 27/09/2007 |
| CADconform for MicroStation v6.04.01 | B-20071279 | Conform Change-All scales up cells incorrectly when Apply Scale = User Defined | Conform | 21/09/2007 |
| CADconform for MicroStation v6.03.10 | B-20071273 | Auto-update and Auto-restart sometimes crash MicroStation | Configuration | 4/09/2007 |
| CADconform for MicroStation v6.03.10 | B-20071275 | Certifying multiple files may succeed if no errors but bordersheet fails | Watermarking | 10/09/2007 |
| CADconform for MicroStation v6.03.07 | B-20071271 | Conform displays a 'corrupt element' warning in v8 for deleted elements | Conform | 3/09/2007 |
| CADconform for MicroStation v6.03.07 | B-20071270 | Match cell on library levels did not work with B-spline knot components | Feature Table Editor | 3/09/2007 |
| CADconform for MicroStation v6.03.07 | B-20071272 | Conform score for a mismatched cell feature could hit 100% | Conform | 3/09/2007 |
| CADconform for MicroStation v6.03.07 | B-20071269 | Full cell library path is truncated unnecessarily when added in FTE | Feature Table Editor | 2/09/2007 |
| CADconform for MicroStation v6.03.06 | B-20071267 | CADconform Cell Selector no longer opened for cells in Draft | Drafting Menu | 29/08/2007 |
| CADconform for MicroStation v6.03.06 | B-20071268 | German build reported percentage of conformance incorrectly | Reporting | 30/08/2007 |
| CADconform for MicroStation v6.03.05 | B-20071264 | The "Allow Other feature tables" option in User Manager no longer works | User Manager | 24/08/2007 |
| CADconform for MicroStation v6.03.05 | B-20071262 | Branding and user manager options would be lost on reload | User Manager | 23/08/2007 |
| CADconform for MicroStation v6.03.05 | B-20071263 | Conform score for a mismatched text feature could hit 100% | User Manager | 23/08/2007 |
| CADconform for MicroStation v6.03.04 | B-20071261 | Symbology ranges are allowed even when the symbology isn't matched on | Feature Table Editor | 21/08/2007 |
| CADconform for MicroStation v6.03.04 | B-20071260 | Watermarks did not support exclusion cells > 32 characters per cell name | Watermarking | 21/08/2007 |
| CADconform for MicroStation v6.03.04 | B-20071258 | Conform Show/Hide shows all text elems when linespacing is the only difference | Conform | 21/08/2007 |
| CADconform for MicroStation v6.03.04 | B-20071259 | Watermark info dialog could not handle strings > 512 characters | Watermarking | 21/08/2007 |
| CADconform for MicroStation v6.03.03 | B-20071253 | Spurious missing file error when converting Normal Text to Bilingual text | Batch Processor | 15/08/2007 |
| CADconform for MicroStation v6.03.03 | B-20071252 | Choosing a cell name using 'Browse' expands the cell lib path | Feature Table Editor | 14/08/2007 |
| CADconform for MicroStation v6.03.03 | B-20071248 | Cell scale checking option 'Allow Either' for drawing scale not working | Conform | 9/08/2007 |
| CADconform for MicroStation v6.03.03 | B-20071246 | Apply cell scale for drafting gets reset from 'Always' to 'Never' on upgrading | Feature Table Editor | 9/08/2007 |
| CADconform for MicroStation v6.03.03 | B-20071244 | Draft by weight would display blank if the default was not in the allowed range | Conform; Drafting Menu | 13/07/2007 |
| CADconform for MicroStation v6.03.03 | B-20071256 | Watermark invalidates during report but not on file open | Watermarking | 17/08/2007 |
| CADconform for MicroStation v6.03.03 | B-20071257 | Watermark invalidates straight after certification with many exclusion cells | Watermarking | 17/08/2007 |
| CADconform for MicroStation v6.03.03 | B-20071250 | Occasional corruption of user data attribute reading from database | Feature Table Editor | 10/08/2007 |
| CADconform for MicroStation v6.03.02 | B-20071243 | Auto-update of software would sometimes mess up the Bin path | Configuration | 12/07/2007 |
| CADconform for MicroStation v6.03.01 | B-20071223 | Conform change all was much slower in version 6 than in version 5 | Conform | 5/06/2007 |
| CADconform for MicroStation v6.03.01 | B-20071224 | Cell libraries are not found by MS_CELL variable in Conform | Conform | 5/06/2007 |
| CADconform for MicroStation v6.03.01 | B-20071227 | CADconform was looking for the wrong legacy licence file name | Licensing | 11/06/2007 |
| CADconform for MicroStation v6.03.01 | B-20071215 | Reference files are ignored after the first undisplayed file | Reporting | 28/05/2007 |
| CADconform for MicroStation v6.03.01 | B-20071217 | Cancelling the ranges dialog on a Change All would act like 'OK' was pressed | Conform | 28/05/2007 |
| CADconform for MicroStation v6.03.01 | B-20071216 | Multiple selections of colour/weight ranges are not retained properly on reopen | Feature Table Editor | 28/05/2007 |
| CADconform for MicroStation v6.03.01 | B-20071197 | Spurious warnings about the User Manager privilege when saving PWL | User Manager | 25/05/2007 |
| CADconform for MicroStation v6.03.00 | B-20071169 | Draft by Ranges does not always set the correct level on level change | Drafting Menu | 10/04/2007 |
| CADconform for MicroStation v6.03.00 | B-20071173 | Installer presents "Select Additional Tasks" dialog for "Server" only installation | Installer | 16/04/2007 |
| CADconform for MicroStation v6.03.00 | B-20071188 | Opening and cancelling the Report Select DGN dialog sometimes crashes | Reporting | 20/04/2007 |
| CADconform for MicroStation v6.03.00 | B-20071162 | Crash when conforming to a text style that doesn't exist | Conform | 2/04/2007 |
| CADconform for MicroStation v6.03.00 | B-20071201 | Various German dialog item and language fixes | Menus / Interface | 11/05/2007 |
| CADconform for MicroStation v6.03.00 | B-20071196 | Copy-paste password into login dialog shows as clear text | Login; User Manager | 2/05/2007 |
| CADconform for MicroStation v6.03.00 | B-20071194 | Occasional crash when adding DGNs to report with multiple models | Reporting | 26/04/2007 |
| CADconform for MicroStation v6.03.00 | B-20071195 | Files that are self referenced may be listed twice by default in report | Reporting | 26/04/2007 |
| CADconform for MicroStation v6.03.00 | B-20071189 | Undisplayed reference files appear blank in Report Manager | Reporting | 20/04/2007 |
| CADconform for MicroStation v6.03.00 | B-20071176 | Choosing levels does not show all unused DGNLIB levels | Conform; Reporting | 1/05/2007 |
| CADconform for MicroStation v6.03.00 | B-20071156 | Conform doesn't always show the next unmatched element automatically | Conform | 4/04/2007 |
| CADconform for MicroStation v6.03.00 | B-20071193 | C4M-J needs some maintenance due to crashes and missing dialog items | Feature Table Mgr | 2/05/2007 |
| CADconform for MicroStation v6.03.00 | B-20071190 | Opening a branded DGN without the DSN/DB causes a major league crash | Other | 23/04/2007 |
| CADconform for MicroStation v6.03.00 | B-20071180 | Conform chokes when handling DWG block libraries that are too modern | Conform | 19/04/2007 |
| CADconform for MicroStation v6.03.00 | B-20071184 | Report Job file with very long lines can cause buffer overflow on read | Batch Processor; Reporting | 19/04/2007 |
| CADconform for MicroStation v6.03.00 | B-20071185 | Report Job was not always reading ref file level settings correctly | Batch Processor; Reporting | 19/04/2007 |
| CADconform for MicroStation v6.03.00 | B-20071181 | Cell Selector shows black on black for colour zero in Paperspace | Menus / Interface | 23/04/2007 |
| CADconform for MicroStation v6.03.00 | B-20071165 | Conform isn't immediately rejecting V7 cell libraries in MS >= v8 | Conform | 4/04/2007 |
| CADconform for MicroStation v6.03.00 | B20060536 | Conform does not summarise the 'Scan Selection Set' mode when active on startup | Conform | 5/04/2007 |
| CADconform for MicroStation v6.03.00 | B20060772 | Linestyle scale can not be checked/drafted with BYLEVEL | Feature Table Editor | 19/09/2008 |
| CADconform for MicroStation v6.03.00 | B20060510 | No informative error when dimension style could not be found in Conform. | Conform | 3/04/2007 |
| CADconform for MicroStation v6.03.00 | B20060648 | CSV import is not setting BYLEVEL properly | Feature Table Editor | 19/09/2008 |
| CADconform for MicroStation v6.02.07 | B-20071154 | Branding does not update when switching drawings | Branding | 23/03/2007 |
| CADconform for MicroStation v6.02.07 | B-20060983 | Import from Settings Manager reverses the feature order | Feature Table Editor | 22/03/2007 |
| CADconform for MicroStation v6.02.07 | B-20071153 | Batch reporting API does not support TXT export setting correctly | Batch Processor | 27/03/2007 |
| CADconform for MicroStation v6.02.07 | B20060694 | Pressing Cancel in Select Cell dialog produces warning | Conform | 27/03/2007 |
| CADconform for MicroStation v6.02.07 | B-20071157 | Occasional C4M crash if the design file is closed while conforming | Conform; Other | 26/03/2007 |
| CADconform for MicroStation v6.02.07 | B-20060857 | Crash when exporting to a database table that is open in Access | Feature Table Editor | 21/03/2007 |
| CADconform for MicroStation v6.02.06 | B-20071148 | Errors when importing exported feature selections from dictionaries | Feature Table Editor | 19/03/2007 |
| CADconform for MicroStation v6.02.06 | B-20071141 | A few problems with the CSV Import and Export dialogs | Feature Table Editor | 14/03/2007 |
| CADconform for MicroStation v6.02.06 | B-20071150 | Find error from Report Viewer fails due to dimension location | Reporting | 19/03/2007 |
| CADconform for MicroStation v6.02.05 | B-20071137 | Starting Locate > Add tool clears existing selection set | Drafting Menu; Feature Table Editor | 13/03/2007 |
| CADconform for MicroStation v6.02.04 | B-20071129 | Change My Password text item does not delete properly | Feature Table Editor | 8/03/2007 |
| CADconform for MicroStation v6.02.04 | B-20071118 | Conform change level does not work in XM | Conform; Feature Table Editor | 28/02/2007 |
| CADconform for MicroStation v6.02.04 | B-20071117 | Cell library path clipping does not work properly in XM | Feature Table Editor | 1/03/2007 |
| CADconform for MicroStation v6.02.04 | B-20071124 | Conform should list an unmatched cell's scale | Conform | 28/02/2007 |
| CADconform for MicroStation v6.02.04 | B-20071120 | Find text feature from Report Viewer sometimes fails | Reporting | 26/02/2007 |
| CADconform for MicroStation v6.02.04 | B20060512 | Modify table name stuffs up table description | Feature Table Mgr | 12/03/2007 |
| CADconform for MicroStation v6.02.04 | B-20071134 | When Installing a Network C4M does not allow you to do the Client Install. | Installer | 8/03/2007 |
| CADconform for MicroStation v6.02.03 | B-20071108 | Preferences dialog is not opening correct default config file | User Manager | 6/02/2007 |
| CADconform for MicroStation v6.02.03 | B-20071095 | Selecting a new cell is not always necessary when conforming | Conform | 31/01/2007 |
| CADconform for MicroStation v6.02.03 | B-20071073 | The installer doesn't contain "MFC70U.DLL" | User Manager | 18/01/2007 |
| CADconform for MicroStation v6.02.03 | B-20071115 | Conform by fence is broken in XM | Conform | 19/02/2007 |
| CADconform for MicroStation v6.02.03 | B-20071113 | Zoom does not work on 1D elements in XM | Conform | 12/02/2007 |
| CADconform for MicroStation v6.02.03 | B-20071114 | Flash element does not work in XM | Conform | 15/02/2007 |
| CADconform for MicroStation v6.02.03 | B-20071084 | Export to CSV refuses to load the dialog | Feature Table Editor | 31/01/2007 |
| CADconform for MicroStation v6.02.03 | B-20071112 | Draft by Ranges does not set text width/height on change | Drafting Menu | 8/02/2007 |
| CADconform for MicroStation v6.02.03 | B20060532 | Text Width & Height ranges produce spurious errors | Feature Table Editor | 6/02/2007 |
| CADconform for MicroStation v6.02.03 | B-20071101 | Multiscale checking of cells with scale lock is inconsistent | Conform | 6/02/2007 |
| CADconform for MicroStation v6.02.03 | B-20071116 | Display filter and Show/Hide in Conform is broken in XM | Conform | 16/02/2007 |
| CADconform for MicroStation v6.02.03 | B-20060932 | CSV Exporter Options dialog is bigger than neccessary | Feature Table Editor | 31/01/2007 |
| CADconform for MicroStation v6.02.03 | B-20060931 | Inconsistent order of primary properties controls | Conform; Feature Table Editor | 31/01/2007 |
| CADconform for MicroStation v6.02.02 | B-20071139 | Check that cell scales are equal relative to all axes | Conform | 23/01/2007 |
| CADconform for MicroStation v6.02.02 | B-20061051 | The 'Find Reference Files' button sometimes finds duplicates | Reporting | 20/12/2006 |
| CADconform for MicroStation v6.02.02 | B-20061050 | Can't update existing transient watermark | Reporting; Watermarking | 21/12/2006 |
| CADconform for MicroStation v6.02.02 | B-20071056 | The "HTML Feature Report" batch file contains unwanted quotes | Feature Table Editor; HTML Reports | 2/01/2007 |
| CADconform for MicroStation v6.02.02 | B-20071055 | The config file directs C4M to the wrong 'conformReport.exe' dir | Configuration | 2/01/2007 |
| CADconform for MicroStation v6.02.02 | B-20061049 | User is logged out after changing password via Login dialog | Login | 19/12/2006 |
| CADconform for MicroStation v6.02.01 | B-20061048 | CADconform does not work on the second launch | Configuration | 15/12/2006 |
| CADconform for MicroStation v6.02.01 | B-20061045 | Patching installer to newer version does not auto-update client | Configuration | 14/12/2006 |
| CADconform for MicroStation v6.00.00 | B-20060992 | Dimension style combobox is no longer working | Feature Table Editor | 17/11/2006 |
| CADconform for MicroStation v6.00.00 | B-20061018 | Need to separate cache dirs for AutoCAD and MicroStation | Configuration | 4/12/2006 |
| CADconform for MicroStation v6.00.00 | B-20061007 | Division by zero crash when setting dimstyles with no textstyle | Feature Table Editor | 17/11/2006 |
| CADconform for MicroStation v6.00.00 | B-20061001 | Match on Library name was not scoring correctly in Conform for v8 cell libs | Conform | 14/11/2006 |
| CADconform for MicroStation v6.00.00 | B20060714 | Update client from server doesn't always copy DLLs locally after first install | Other | 7/11/2006 |